Termékek dobozok és (373)

Product Features: • Rugged, diecast aluminium alloy (tough - yet easy to machine), electronic instrument enclosure. • Aluminium allow to BS1490, LM2M - supplied in natural finish. • Eddystone designed. The Eddystone brand was purchased by Hammond in 1998. • Lap joint construction provides protection against access of dust and splashing water. Also provides excellent EMC performance. • Lids are retained by M3.5 x 12 countersunk screws (POZIDRIV No. 2 head). • Countersunk lid holes. • Designed to meet IP54. • Low side wall draft angle (2 degrees or less) for easy P.C. board mounting.

Product Features: • Low profile - ergonomically designed for a comfortable fit into the user's hands. • Perfect for instrument or mobile data enclosures requiring a touch screen. • Choice of three sizes. All available with or without battery compartment. • Moulded from flame retardant ABS plastic, choice of black or grey - material carries a UL flammability rating of 94V-0. • Enclosure is assembled with six (6) - M3-0.5 x 18mm Philips machine screws, threaded into integral brass bushings. Perfect for applications when repetitive assembly and disassembly are required. • Integral brass bushings are factory inserted into the top half of the enclosure. • Lap joint construction provides protection against access of dust and splashing water. Designed to meet IP54. • P.C. board standoffs are moulded into case top and bottom halves.

For more information on this product range please click the link above or simply visit https://kgaenclosures.com to view the complete range of enclosures, transformers and components we stock, all at great competitive prices.

Product Features: • The Sink Box series is a British designed extruded aluminium enclosure (originally sold under the West Hyde Enclosures Ltd. name). • Ideally suited for mounting small printed circuit boards or chassis horizontally. • The enclosure body is formed from a single hollow aluminium extrusion. This gives the unit high strength as well as simplifying assembly. • The aluminium extrusion has fins on one side (the top) which act as a heat sink. Aluminium end panels are attached to each end. • Extrusions are anodised in a choice of either black or clear. • The interior of the enclosure contains: • Numerous slots on both of the shorter sides to accept a P.C. board or chassis • Three "T" slots (one in the top and two in the bottom) which provide an alternative method of mounting chassis or components that need to be cooled by conduction • The single "T" slot in the top takes an M3 half-nut • The two "T" slots in the bottom take M4 half-nuts

Product Features: • Rear of unit contain one or two (depending on console size), flat removable panels for easy modifications. • Standard versions are moulded from flame retardant ABS plastic. Material carries a UL flammability rating of 94V-0. • Economy version is moulded from general purpose (not flame retardant) ABS plastic. • Includes 4x black rubber feet per enclosure. For replacement packs of 24 feet, see part number 1421T2.

Product Features: • Versions without mounting flanges are available in unfinished aluminium or smooth ASA 61 grey powder coat (Hammond colour GY2). • Versions with wall-mounting flanges are available in unfinished aluminium or smooth black powder coat (Hammond colour BK2). • Unpainted aluminium version is protected through manufacturing and shipping with a plastic film cover to ensure a high quality finish. Also doubles as a removable drilling template. • Steel finished in ASA 61 grey baked powder paint (inside and out to prevent rust).

1455TSNUT (Hammond Manufacturing Enclosures) 1455NC Series Enclosures T-Nut with - Product Features: • Designed to house P.C. boards or equipment - for easy enclosure mounting to aluminium channel. • Two versions to choose from (open bezel with metal endplates OR solid ABS plastic bezel). • Sizes for P.C. boards with 92mm (min.) to 98mm (max.) width. Enclosures will not accept and were not designed for 100mm wide Eurocard. • P.C. boards mount horizontally by sliding into internal slots extruded into the enclosure body. • Rugged one piece body - constructed from extruded aluminium with a minimum thickness of .09" (2.29mm). • Extruded body and aluminium endplates (on metal endplate version) are clear anodised. • Open bezel - metal endplate version includes eight (8) clear zinc plated assembly screws. Note: Recommended screw torque is 5 lbf/in. Solid bezel version includes eight (8) black assembly screws. Note: Recommended screw torque is 5 lbf/in.

Product Features: • Electronic instrument enclosures, designed for mounting printed circuit boards or DIN rail mounted components. • The polycarbonate material carries a UL flammability rating of UL94 5V and is suitable for outdoor use. • Lid and mounting holes are located outside of the gasket seal. • Lid is secured with self captivating M4 stainless steel machine screws (included), threaded into integral stainless steel bushings (for repetitive assembly and disassembly). • Heavy duty 16 gauge galvanized steel panels available. • All stainless steel hardware to avoid corrosion caused by dissimilar metals. • Gasket is a preformed, high temperature U.L. listed silicone rubber. Gasket is replaceable. • Gasketed lid with two piece "tongue and groove" construction provides protection against access of oil, dust and water. • Internal DIN rail mounting tabs.

For more information on this product range please click the link above or simply visit https://kgaenclosures.com to view the complete range of enclosures, transformers and components we stock, all at great competitive prices.

For more information on this product range please click the link above or simply visit https://kgaenclosures.com to view the complete range of enclosures, transformers and components we stock, all at great competitive prices.

To see more information on this great range of products, simply click the link above or visit https://kgaenclosures.com We have over 30,000 products from great manufacturers, including Hammond Manufacturing, Deltron Manufacturing and Hylec APL Electronics. All products are available at great low competitive prices, with world-wide shipping available.

C3R12124SCNKO (Hammond Manufacturing Electrical Enclosures) C3R SC NKO Series - For more information on this product range please click the link above or simply visit https://kgaenclosures.com to view the complete range of enclosures, transformers and components we stock, all at great competitive prices.

Product Features: • Standard lengths of 80mm, 120mm, 160mm and 220mm. Custom extrusion lengths are available upon request. • Standard widths of 104mm, 132mm, 164mm and 224mm. Custom extrusion widths are available upon request. • Fixed extrusion height of 82mm (2U). • Standard anodised colours include Pre-Anodised Silver. Custom anodised colours are available upon request. • Manufactured in Aluminium 6063 T6. • PCB Size: • Maximum component width of 220mm • Maximum component height of 55mm • Please remember custom size length and widths are available, as well as P.C. Board Carrier Plates • Large range of accessories are available include DIN Rail Clips, Clip on Mounting Brackets, etc.

Product Features: • Standard lengths of 80mm, 120mm, 160mm and 220mm. Custom extrusion lengths are available upon request. • Standard widths of 108mm, 136mm, 168mm and 228mm. Custom extrusion widths are available upon request. • Fixed extrusion height of 44.2mm (1U). • Standard anodised colours include Pre-Anodised Silver. Custom anodised colours are available upon request. • Manufactured in Aluminium 6063 T6. • PCB Size: • Maximum component width of 200mm • Maximum component height of 31mm • Please remember custom size length and widths are available, as well as P.C. Board Carrier Plates • Large range of accessories are available include Mounting Lugs, DIN Rail Clips, Clip on Mounting Brackets, etc.

For more information on this product range please click the link above or simply visit https://kgaenclosures.com to view the complete range of enclosures, transformers and components we stock, all at great competitive prices.

Product Features: • Heavy duty (0.1" thick) aluminium base and top - for extra strength (front and back panel will not push in from mounted buttons, controls, connectors, etc). • Sides include four horizontal rows of louvers for ventilation. • Includes heavy duty (0.1" thick) aluminium raised mounting panel. Mounting surface includes 8 press nuts for mounting and a 5" (127mm) x 8.63" (219mm) area. • Front and back is recessed near the top with flange - to act as built in lifting handles. • Sold pre-assembled in a light textured - dark grey powder coat finish. • Comes with three cord grommets for front and rear holes and required assembly hardware. • Assembled with 8 self-tapping Philips head screws.

Product Features: • Standard lengths of 80mm, 160mm and 220mm. Custom extrusion lengths are available upon request. • Fixed extrusion width of 169.8mm. • Fixed extrusion height of 53.8mm. • Standard anodised colours include Black, Pre-Anodised Black and Silver. Custom anodised colours are available upon request. • PCB Size: • Maximum component width of 160mm • Maximum component height of 40.75mm • Weight 3.46 kg/m. • Large range of accessories are available include Mounting Lugs, DIN Rail Clips, Clip on Mounting Brackets, Sealing Kits, etc.

For more information on this product range please click the link above or simply visit https://kgaenclosures.com to view the complete range of enclosures, transformers and components we stock, all at great competitive prices.

Product Features: • Moulded in a general purpose ABS plastic with a satin texture. • Enclosure designed to allow access to I/O connectors and often used controls and/or Led's. • Models are adaptable to a wide selection of Arduino's. • Enclosure is secured with self tapping screws. • Includes four (4) self adhesive rubber feet and instruction sheet. • Arduino boards are not included.

For more information on this product range please click the link above or simply visit https://kgaenclosures.com to view the complete range of enclosures, transformers and components we stock, all at great competitive prices.

Product Features: • Moulded in a general purpose ABS plastic with a satin texture. • Enclosure designed to allow access to I/O connectors and often used controls and/or Led's. • Enclosure is secured with self tapping screws. • Includes four (4) self adhesive rubber feet and instruction sheet. • Boards are not included.

For more information on this product range please click the link above or simply visit https://kgaenclosures.com to view the complete range of enclosures, transformers and components we stock, all at great competitive prices.

Product Features: • Rugged, diecast aluminium alloy (tough yet easy to machine), electronic instrument enclosure. • Available in natural vibra finish OR in light textured, black powder paint. • Unpainted version is vibra finished for a smooth surface with no sharp edges. • Painted version is painted with tough satin black polyester powder paint for a lasting finish, even after machining. Black screws are included to enhance the assembled appearance. • Lap joint construction protection against access of dust and splashing water. Also provides for improved EMI/RFI shielding. The enclosure does not provide shielding when water-tight gaskets are installed. • M3.5 x 0.6 x 12mm long stainless steel, Philips head, machine screws secure lid into factory tapped holes. • Designed to meet IP54 without a gasket or IP66 with a gasket. IP67 upgraded gaskets are available. • All sizes except 1550Z101** carry an impact rating of IK08 per IEC62262.

For more information on this product range please click the link above or simply visit https://kgaenclosures.com to view the complete range of enclosures, transformers and components we stock, all at great competitive prices.

For more information on this product range please click the link above or simply visit https://kgaenclosures.com to view the complete range of enclosures, transformers and components we stock, all at great competitive prices.

For more information on this product range please click the link above or simply visit https://kgaenclosures.com to view the complete range of enclosures, transformers and components we stock, all at great competitive prices.

For more information on this product range please click the link above or simply visit https://kgaenclosures.com to view the complete range of enclosures, transformers and components we stock, all at great competitive prices.

For more information on this product range please click the link above or simply visit https://kgaenclosures.com to view the complete range of enclosures, transformers and components we stock, all at great competitive prices.

Product Features: • Electronic instrument enclosures, ideally suited for mounting printed circuit boards. • Ergonomically designed for a comfortable fit into the user's hand. • Designed to meet IP54 ratings. • Recessed top for membrane display or pad. • Units with battery door use the long life "three snap" door. • Lap joint construction provides protection against dust accumulation and splashing water. • Moulded in a choice of black, grey or transparent blue general purpose ABS plastic with a satin texture. • Unit is secured with self tapping screws. • Black and transparent blue enclosures include black screws, grey includes nickel finish screws.

Product Features: • Used in chimes, door bells, security systems, decorative lighting, furnaces, humidifies, appliances, vending machines, intercom system type applications. • Rugged, low noise design, indoor use only. • Stripped wire input (primary) leads, screw terminal output (secondary). • Mounted on box plate for easy installation. • Input leads are black 6" minimum, on 240V models 240V lead is red. • All models are designed for 50/60 Hz. operation - limited by built in circuit breaker. • c UL us listed #E184371 - Class 2 Not inherently limited. • CSA certified (209651).